Create a logo in Affinity Designer
Easy to use and with a number of creative tools under its belt, Affinity Designer is a great tool. So, if you’re working on a new logo design, for example, it has everything you need to create a unique and striking design. In this article, we are going to have a look on the logo designing technique of the Affinity designer in, Create a logo in Affinity Designer.
Let’s get started!
Step 01: Start by Creating a New File
- Create a new document
- Select the rectangle tool (M) and draw on a black background.
- The Fill and Stroke tool can be found top right of the interface.
- Select the Artistic Text tool (T) and set your copy.
- Type a decent font type in Create a logo in Affinity Designer
Step 02: Gradients
- To get the same look as shown as do as directed, the majority of the design is put together with gradients.
- To create gradients:
- Simply select your object
- Click the Fill tool and a window will appear below
- Select the Gradient tab.
- To add more colors to your gradient just double click along the gradient line.
Step 03: Saving the Gradients
- To save your gradient do the following:
- Click the Swatch tab below the gradient window.
- Next, to the drop down color menu, there’s a small palette icon.
- Click it.
- To change the direction of your gradient, select the Fill tool (G), this will bring up a guide that’ll allow you to move it around.
Step 04: Using the Pen Tool
- For the horizon, select the Pen tool (p)
- Draw a tattered line across the middle of the text.
- Create a shape that fills the bottom half of the type, and then add your purple gradient.
- Next, simply cut, make sure your Text has been selected
- Then paste inside.
- If you need to move this shape inside the type, click the arrow next to the layer in the layer window, and the shape to select and move should open below.
Step 05: Add a Gradient
- To add a gradient to the stroke of the type,
- Click the Stroke tool, in the top right of the interface,
- Then add the alternating black and white outline gradient.
- To change the direction of the outline gradient, select the fill tool (G), to get to the outline.
- In the top left there’s a Context drop down menu, change this from Fill to Stroke.
- For the effect, we need to go from corner to corner to give the glossy look in Create a logo in Affinity Designer.
Step 06: Rendering the Neon Glow
- For adding Neon Glow:
- Add a dark pink to a light pink gradient,
- Then select the FX icon at the bottom of the Layers palette.
- This will bring up your layer effects window.
- Here’s where we’re going to add an outer glow and the bevel/emboss effect.
- For the outer glow, keep the blend mode on screen and alter the ‘radius and intensity’ to get the desired effect.
- Giving it a mid pink color will help finish off the effect.
Step 07: Alter the measurements
- Once you’ve ticked the bevel/emboss box, make sure the bevel type is set to ‘inner’.
- Altering the ‘radius and soften’ will give you the edge while tweaking the light direction, and ‘highlight and show color’ should add the details.
- For keeping the similar effect, highlight an off pink/white tone, and the shadow a deep purple.
Step 08: Obtaining the Flare
- For the flares:
- Draw two ellipses with the Ellipses tool (M), one bigger than the other.
- Next add a Gaussian blur layer effect with the FX icon, making the bigger one more blurred that the smaller one.
- Using the Shift key, select them both and place them on top of each other.
- It’s a good idea to group them at this point.
- Copy as many as you need and move them to the white parts of the outline to give the glossy effect in Create a logo in Affinity Designer.
Step 09: Adding Shapes
- Selecting the Triangle tool, draw a triangle and use middle anchor point to rotate it 180 degrees.
- Once done, draw five rectangles (M) evenly spacing them apart and combine them together with the Add icon; a blue circle and square together in the top right corner of the interface.
- Then selecting both the triangle and the rectangle, subtract them using the icon next to the Add icon.
- Once filled with a dark blue, you might need to move the shape behind the main logo.
- You can do this using and to move it a layer back and forth.
Step 10: Finishing the Logo
- Add some noise to the resultant logo.
- The easiest way of doing this is to draw a rectangle over the whole logo and fill with white.
- When you click the fill tool (in this case to the left), select the Color tab.
- At the bottom, there’s an opacity slider, if you click the small circle next to it, it’ll change to a noise slider.
- Slide this to add as much noise as you want.
- All you need to do now it change the layer blend mode from normal to multiply.
These were some easy steps to get through affinity designer in Create a logo in Affinity Designer. Hope you liked the article. Happy Designing!!!